Large Industrial Storage Tents Aluminum Frame, Outdoor Storage Tents, movable warehouse

Large Industrial Storage Tents Aluminum Frame , Outdoor Storage Tents


Product Description
1. Application of Outdoor Industrial Storage Tent
The tent series are widely used as the Temporary or Semi-permanent Warehouse Structures, Permanent workshop tent, industrial tent etc..

2. Specification for Outdoor Industrial Storage Tent (BT series)
Main frame profile: 204X120X4mm.
Wind load: 100km/h.
Minimum tent length: In order to reach the designed wind load and make sure the tent is safety, pls set up the tent with the required minimum tent length.
3. Optional Accessories for Outdoor Industrial Storage Tent
wooden floor, glass door, glass wall, glass window, ABS hard wall, steel sandwich wall, ground anchors, anchor puller, weight plate, sidewalls with PVC-clear window, rain gutters, decoration ceilings and inside curtain, ramp, transport rack.

4. Materials of Outdoor Industrial Storage Tent
Fabric: Double PVC coated polyester fabric, 750-900g/sq. M, water proof, UV resistance, fire retardant according to standard NFPA701, CFM & DIN4102 B1/M2
Frame: Hard pressed extruded aluminum 6061/T6, anodized surface finishing.
Connections: Hot-DIP galvanized

5. Life span of Outdoor Industrial Storage Tent
Fabric (cover & sidewalls): more than 10years;
Aluminum frame and galvanized connectors: more than 20years

6. Products certificate of Outdoor Industrial Storage Tent
Fabric: Test reports for the fire retardant, standards: NFPA701, CFM & DIN4102 B1/M2
Structure safety: Certificates by the registered engineers in the U. S. A & Australia.
(If the customers need above certificates copy, pls feel free to contact with Liri Tent Technology. We will not show them on the website to avoid copys.)

Fxing Methods :
1) If it is concrete ground, pls use the expandable bolts.
2) If it is tarmac ground or grass ground or sand ground or other soft grounds, pls use the steel anchors;
3) If it is marble or tile ground or other kind indestructible grounds, pls use the weight plates system;
4) If you will make the concrete bases to fix the tent, pls use the embeded bolts M24x500mm.